Liqcreate Wax Castable is a blue wax-based photopolymer with reliable processability and accuracy on LCD/MSLA, DLP and laser based 3D-printers. 3D-printed parts from this material captures intricate features and show crisp details. This wax-based material offers smooth surfaces with clean burnout for a reliable casting process. Create custom made elegant organic geometries with positive and [...]
Read More
3D-Printed parts are used in a wide range of applications. In some of these applications the parts are exposed to petrol, cleaning agents or other chemicals. Our engineering team started to investigate the resistance of common chemicals on 3D-printed parts. Compatibility of 3D-printed and post-cured resin parts were tested with several chemicals in this article [...]
Read More
An important factor in the quality of 3D-printed parts is the support structures. These supports can vary for each 3D-printer and for each material. Support of resin 3D-printed parts In general rigid polymers like Deep Blue, Strong-X, Premium White/Black/Model are easy to print with a combination of light and medium supports as shown in Figure [...]
Read More
RoHS stands for Restriction of Hazardous Substances and restricts the use of specific hazardous materials found in electrical and electronic products. Sometimes there is confusion between RoHS and REACH. REACH stands for Registration, Evaluation, Authorisation and Restriction of Chemicals. Both are regulations of the European Union. The main difference between RoHS and REACH is that [...]
Read More
There are a lot of resin materials available on the market, all with different mechanical properties and prices. In contrast to FDM, where polymer filament is used from a known material with certain mechanical properties, SLA, DLP and LCD 3D printers use resin where mechanical properties are obtained by the chemical composition of the resin. [...]
Read More
The Liqcreate user guide per product is replaced by online articles. You can find more information on each subject by clicking on the links below. Liqcreate user guide: General information - 3D-printing parameters - Post-processing and washing guide - Post-curing guide - How to get non-sticky resin 3D-printed parts - Supporting parts - Shrinkage [...]
Read More
3D-printing was discovered more than 30 years ago by the original founder of 3D-systems[1]. This first 3D-printer was named stereolithography apparatus and used a laser to cure a light reactive resin. During the years after the discovery, other companies like EnvisionTEC[2] came up with new methods of curing the light reactive resin, by projector, instead [...]
Read More