Printer Settings

3D-printing parameters for Liqcreate resins for Creality LD-002H

The Creality LD-002H 2K Monochrome LCD/MSLA 3D-printer is an open printer with a 405 nm light source. The Creality LD-002H is completely open for 3rd party resins. Due to its monochrome screen, even our DLP and SLA resins can be printed with relatively reasonable printing speed. Some resins have been optimized. Most other resins could [...]

Resin 3D-printing settings for Anycubic Photon Mono-X

The Anycubic Photon Mono-X is an 4K monochrome LCD / MSLA resin 3D-printer. The Anycubic Photon Mono-X is compatible with Liqcreate resinsThe following settings are optimized for Liqcreate resin. Due to its monochrome LCD screen, even our DLP and SLA resins can be printed with relatively reasonable printing speed. More information about the differences between [...]

Compatible resins & settings for the Phrozen Sonic Mini

The Phrozen Sonic Mini and Phrozen Sonic XL 4K resin 3D-printers haven been optimized by our partners. Not all settings are currently available. If your preferred resin is not listed, please reach out to info@liqcreate.com and our technical team will help.   Contact us   Phrozen Sonic Mini resin 3D-printing settings. Resin Layer thickness Curing [...]

Printing parameters for Liqcreate resins on the Peopoly Phenom L

The Peopoly Phenom L LCD/MSLA 3D-printer is a large, open printer with a 405 nm light source, compatible with 3rd party resins. Some resins have been optimized. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have any questions. Contact us   [...]

Creality LD-002R compatible Liqcreate resin & parameters

The Creality LD-002R 2K RGB LCD/MSLA 3D-printer is an open printer with a 405 nm light source, compatible with 3rd party resins. Some resins have been optimized. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have any questions. Contact us   Resin [...]

EPAX X1N compatible Liqcreate resin & 3D-print settings – Epax3D

The EPAX X1N LCD/MSLA 3D-printer is an open printer with a 405 nm light source, compatible with 3rd party resins. Settings for the EPAX X10 with RGD color LCD screen are tested by EPAX3D. Full list of settings can be find here. Some resins have been optimized. Most other resins could also work on this [...]

Atum3D DLP station 5 compatible resin & parameters

The Atum3D DLP station 5 is a high power DLP 3D-printer and completely open for 3rd party resins. Settings for the Atum3D 3D-printer are optimized for Liqcreate resin Deep Blue, Stone Coal Black, Strong-X, Composite-X, Premium White, Tough-X, ESD, Bio-Med Clear, Rigid Pro and Hazard Glow. The 3D-printing parameters can be found in the Atum3D [...]

3D-Printing parameters for Liqcreate resins on the Elegoo Mars

The Elegoo Mars LCD 3D-printer is an open source resin 3d-printer with a 405 nm light source. Settings are optimized for Liqcreate resin. Due to the low power light source of the Elegoo Mars, exposure times are generally longer for this LCD 3D-printer compared to when using DLP and SLA resin. The Premium resin range [...]

Kelant S400 compatible Liqcreate resin & 3D-print settings

The Kelant S400 LCD 3D printer is an open resin 3D-printer with a 405 nm light source, compatible with 3rd party resins. Some resins have been optimized. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have any questions. Contact us   [...]

Prusa SL1 compatible Liqcreate resin & 3D-printing parameters

The Original Prusa SL1 uses MSLA, which means that there is an LED array as it’s light source (405 nm) in combination with an LCD photomask to shape the light image. The SL1 is open source and therefore has full support for 3rd party resin. The SL1 is able to reach a minimum layer height [...]