The Kelant S400 LCD 3D printer is an open resin 3D-printer with a 405 nm light source, compatible with 3rd party resins. Some resins have been optimized. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have any questions. Contact us [...]
Read More
The Original Prusa SL1 uses MSLA, which means that there is an LED array as it’s light source (405 nm) in combination with an LCD photomask to shape the light image. The SL1 is open source and therefore has full support for 3rd party resin. The SL1 is able to reach a minimum layer height [...]
Read More
The Moai is a SLA 3D-printer with a 70 micron Laser spot size, 140 mw Laser power and 405 nm light source (Laser wave length). This 3D printer is completely open for 3rd party resins. Settings are optimized for the Liqcreate resins. Contact us if you need support or have any questions. Contact us Resin Layer [...]
Read More
The Asiga Max UV is a high power DLP 3D-printer and completely open for 3rd party resins. Settings are optimized for most Liqcreate materials, like Strong-X, Clear Impact, Wax Castable, Premium Model, and many other resins. Download resin 3D-print parameters (.ini file) at the Asiga website or download our .ini setting file and start printing [...]
Read More
The Phrozen Shuffle and Phrozen Shuffle XL resin 3D-printers are based on RGB LCD technology. Liqcreate Premium resin range will print fastest on both printers. Not all settings have been optimized and some starting settings are available now. Contact us if you need support or have any questions. Contact us Phrozen Shuffle & Shuffle [...]
Read More
The Slash 3D-printer from Uniz is a medium power LCD 3D-printer and completely open for 3rd party resins. Settings are optimized for most Liqcreate resins. Due to the low power of the light source, the Premium resin range print fastest on this printer. Technically all Liqcreate resins can work on the Uniz Slash printer. However, [...]
Read More
The Wanhao Duplicator 7 (D7) is a low power LCD 3D-printer, completely open for 3rd party resins. Settings are optimized for most Liqcreate resins. Due to the low power light source of the Wanhao D7, exposure times are generally longer. The Liqcreate Premium range is especially developed for printing on low power LCD 3D-printing, leading [...]
Read More
The Cubicon Lux & Lux HD are a high-end DLP 3D-printers and completely open to 3rd party resins. Initial testing has been done with Liqcreate Deep Blue resin which lead to the settings shown below. Due to the curing nature of the other resins, a preliminary setting has been released as a starting point for [...]
Read More
The Kudo3D Bean resin 3D-printer is a low power RGB LCD-based 3D-printer, completely open for 3rd party resins. Settings are optimized for all Liqcreate resins. Due to the low power light source, exposure times are generally longer for the Kudo3D Bean. Liqcreate Premium resins are especially developed for printing on low power LCD 3D-printing, leading [...]
Read More
The Anycubic Photon and Photon S are low powered RGB type LCD 3D-printer, completely open for 3rd party resins. Settings are optimized for all Liqcreate resins. Due to the low power light source, exposure times are generally longer. The Premium resin range is especially developed for printing on low power LCD 3D-printing like the Anycubic [...]
Read More