The Phrozen Sonic Mighty 4K LCD / MSLA 3D-printer is a monochrome 3d-printer with a 405 nm light source, compatible with 3rd party resin. The following settings are optimized for Liqcreate resin. In most cases the settings from the Phrozen Sonic Mini 4K work on the Phrozen Sonic Mighty 4K as well. These settings are [...]
Read More
The Shining 3D AccuFAB D1 DLP 3D-printer is an open printer with a 405 nm light source, compatible with 3rd party resin. Liqcreate Premium resin range is best compatible on this type of 3D-printers due to the low exposure times. Most other resins could also work on this printer, however, not all pre-settings are available. [...]
Read More
The EPAX X1K E6 LCD / MSLA 3D-printer is an open resin printer with a 405 nm light source, compatible with 3rd party resin. Full list of resin settings can be find here. Some resins have been optimized. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you [...]
Read More
The EPAX X10 & E10 LCD/MSLA 3D-printer are open printers with a 405 nm light source, compatible with 3rd party resins. Full list of settings can be find here. Some resins have been optimized. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have [...]
Read More
The Elegoo Saturn 4K Monochrome LCD/MSLA resin 3D-printer is a printer with a 405 nm light source, compatible with 3rd party resin. Learn about the different Elegoo Saturn and mars 3d-printers here or on the official Elegoo Saturn website. All Liqcreate resins are compatible with the Elegoo Saturn. Contact us if you need support or have [...]
Read More
The Elegoo Mars 2 Pro and Elegoo Mars 2 LCD / MSLA 3D-printer are open printers with a 405 nm light source, compatible with 3rd party resin. The following settings are optimized for Liqcreate resin. Contact us if you have any questions. Contact us Download the Chitubox settings for the Elegoo Mars 2 here. Download [...]
Read More
SprintRay is a technology company that builds end-to-end 3D printing ecosystems for dental professionals. Founded in 2014 and launched their first product on kickstarter in 2016, called the Moonray. After the first year, their focused shifted from general 3D-printing to dentistry. The Moonray Printers are partly open, meaning that it is possible to use 3rd [...]
Read More
The Anycubic Photon Mono is a 2K monochrome LCD resin 3D-printer. The Photon Mono is completely open for 3rd party resin. Due to its monochrome screen, even our DLP and SLA resins can be printed with relatively good printing speed. Contact us if you have any questions. More information about the different Anycubic printers. And [...]
Read More
Phrozen3D entered the resin 3D-printing market with resin based LCD / MSLA printers in 2016. Initially they launched a couple 3D-printers in the >$1000 range all based on LCD technology. They have been one of the first companies to develop a bigger LCD platform, next to the more expensive Structo3D Dental 3D-printer. Since 2020, Phrozen [...]
Read More
The XYZ Nobel 1.0A is a laser based resin 3D-printer. According to the manufacturers data the wavelength of the laser is 405nm and the laser spot is 130 microns. Most of our SLA resin range is compatible with the XYZ Nobel 1.0A. Recently, XYZ printing opened up its software to work with 3rd party resin [...]
Read More