The Anycubic Photon Zero is a entry level 480P RGB LCD 3D-printer, completely open for 3rd party resins. Settings are optimized for some Liqcreate resins. For the settings that are not available, a good starting point are the settings published for the Anycubic Photon. Contact us if you have any questions or when you need help with settings.
Anycubic Photon Zero resin 3D-printing parameters
| Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height (mm) | Lift speed / retract speed (mm/min) | Off-time / bottom (seconds) |
| Deep Blue | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Stone Coal Black | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Premium White | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Premium Black | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Premium Model | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Premium Tough | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Wax Castable | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Premium Flex | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Clear Impact | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Strong-X | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Tough-X | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Flexible-X | 100 µm | 26 | 2 | 120 | 10 | 90 / 240 | 0,5 / 3,0 |
| 50 µm | n/a | ||||||
| Hazard Glow | 100 µm | n/a | |||||
| Composite-X | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Dental Model Pro Beige | 50 µm | n/a | |||||
| Dental Model Pro Grey | 50 µm | n/a | |||||
| Gingiva Mask | 100 µm | n/a |
*Heavy supports are adviced for Flexible-X and Tough-X
About the Anycubic Photon Zero resin 3D-printer.
Anycubic Photon Zero resin 3D-printer specifications.
The Anycubic Photon Zero has 480P RGB LCD display. With this technology, the Anycubic Photon Zero is one of the most affordable resin 3D-pritners available. Due to the RGB LCD technology, print speed is slower compared to the new monochrome LCD resin 3D-printers. The build platform of the Anycubic Photon Zero is 97 x 54 x 150 mm and the Zero has a XY resolution of 0,1155mm. This is a significantly lower resolution and print speed as Anycubic’s newer monochrome LCD resin 3D-printers.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
