The Wanhao Duplicator 7 (D7) is a low power LCD 3D-printer, completely open for 3rd party resins. Settings are optimized for most Liqcreate resins. Due to the low power light source of the Wanhao D7, exposure times are generally longer. The Liqcreate Premium range is especially developed for printing on low power LCD 3D-printing, leading to significantly shorter exposure times. Contact us if you need support or have any questions.
Wanhao Duplicator 7 – D7 – resin 3D-printing parameters
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Deep Blue | 100 µm | 24 | First layers 2x 160 seconds |
| 50 µm | 22 | ||
| 35 µm | 21 | ||
| Stone Coal Black | 100 µm | 22 | |
| 50 µm | 15 | ||
| 35 µm | 15 | ||
| Premium White | 100 µm | 11 | |
| 50 µm | 9 | ||
| 35 µm | 7 | ||
| Premium Black | 100 µm | 14 | First layers 2x 180 seconds |
| 50 µm | 13 | First layers 2x 140 seconds | |
| 35 µm | 12 | ||
| Premium Model | 100 µm | 14 | First layers 2x 180 seconds |
| 50 µm | 13 | First layers 2x 140 seconds | |
| 35 µm | 12 | ||
| Premium Flex | 100 µm | 16 | First layers 2x 180 seconds, preliminary settings |
| 50 µm | 14 | First layers 2x 180 seconds, preliminary settings | |
| 35 µm | |||
| Premium Tough | 100 µm | 16 | First layers 2x 180 seconds, preliminary settings |
| 50 µm | 14 | First layers 2x 180 seconds, preliminary settings | |
| 35 µm | |||
| Clear Impact | 100 µm | 22 | First layers 1x 160 seconds |
| 50 µm | 18 | ||
| 35 µm | |||
| Strong-X | 100 µm | 26 | First layers 2x 160 seconds |
| 50 µm | 22 | ||
| 35 µm | 21 | ||
| Tough-X | 100 µm | 35 | First layers 2x 160 seconds |
| 50 µm | 32 | ||
| 35 µm | |||
| Flexible-X | 100 µm | 32 | First layers 2x 160 seconds |
| 50 µm | |||
| 35 µm | |||
| Hazard Glow | 100 µm | 26 | First layers 2x 180 seconds |
| 50 µm | |||
| 35 µm |
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
Printer Settings →
About the Wanhao D7 (Duplicator 7) resin 3D-printer.
Wanhao D7 / Duplicator 7 resin 3D-printer specifications.
- – LCD Screen : 5.5inch (RGB type)
- – Max printing speed : 30mm/hour
- – Max printable area : 121*68.5*180mm
- – Wanhao D7 / Duplicator 7 is compatible with 405nm Resin
- – Accuracy : X:0.075mm ; Y:0.075mm ; Z:0.035-0.1mm
Contact us if you have any questions or when you need help with settings for the Wanhao D7 or other resin based 3D-printers.
