The EPAX X10 & E10 LCD/MSLA 3D-printer are open printers with a 405 nm light source, compatible with 3rd party resins. Full list of settings can be find here. Some resins have been optimized. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have any questions.
EPAX X10 & EPAX3D E10 resin 3D-printing parameters
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Strong-X | 100 µm | n/a | |
| 50 µm | 15 | 4 base layers of 35 seconds | |
| Tough-X | 100 µm | n/a | |
| 50 µm | 16 | 4 base layers of 40 seconds | |
| Flexible-X | 100 µm | n/a | |
| 50 µm | 19 | 4 base layers of 40 seconds | |
| Deep Blue | 100 µm | n/a | |
| 50 µm | n/a | ||
| Stone Coal Black | 100 µm | n/a | |
| 50 µm | n/a | ||
| Premium White | 100 µm | n/a | |
| 50 µm | n/a | ||
| Premium Black | 100 µm | n/a | |
| 50 µm | n/a | ||
| Premium Model | 100 µm | n/a | |
| 50 µm | n/a | ||
| Premium Flex | 100 µm | n/a | |
| 50 µm | n/a | ||
| Premium Tough | 100 µm | n/a | |
| 50 µm | n/a | ||
| Clear Impact | 100 µm | n/a | |
| 50 µm | n/a | ||
| Composite-X | 100 µm | n/a | |
| 50 µm | n/a | ||
| Hazard Glow | 100 µm | n/a |
About the Epax X10 and Epax3D E10 monochrome resin 3D-printer.
Image by Uncle Jessy’s youtube channel: Parts 3D-printed on the Epax3D resin 3D-printers.
Epax3D X10 and E10 monochrome resins 3D-printer specifications
- – High quality dual-linear rails and lead screw for stable resin 3D-prints
- – Unique nFEP film leading to small release force and less stress on print and resin
- – The Epax3D E10 and X10 have high quality latest parallel light for uniform resin curing
- – Upgradeability- Designed to incorporate upgrades inhibiting the cost of having to buy a new Epax machine
- – User friendly & Out of the box ready- these resin printers come fully assembled with all accessories included except resin so you can start printing right away
- – Epax3D Molded vat costs much less, making it easy to own many. The molded vat is corrosion resistant. The vat comes with an installed film and is just a bit over the cost of a film.
- – Partially molded build plate, making it easy to get one spare for your Epax resin 3D-printer.
Contact us if you have any questions or when you need help with settings for the Epax 3D series or other resin based 3D-printers.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
