Anycubic announced the Photon M3 series already some time ago. The entry-level M3 printer has a 4K+ resolution. Which in pixel size is marginally better compared to their Photon Mono 4K. The Photon M3 has an LCD screen with 4096 x 2560 pixels while the Photon Mono 4K has a 4K LCD screen with 3,840 x 2,400 pixels. This is a difference technology compared to the earlier launched Photon Ultra, which uses a DLP projector. The build volume of the Anycubic Photon M3 is 163 * 102 * 180 mm (L * W * H), with a pixel size of 23 micron. The build plate is laser-engraved, which is suposed to improve adhesion of the base layer to the build plate. Additionally an upgraded matrix light engine is used. In a previous article you can find Anycubic Photon M3 parameters for Liqcreate resin. In this current article you can find shrinkage parameters for some resins to 3D-print accurate and precise dental models, engineering models and wax patterns.
Find Anycubic compatible resin
Precise dental & engineering resin 3D-printed models with the Anycubic Photon M3 resin
These parameters in the advance tab of Chitubox will give you the most accurate and precise dental models that the Anycubic Photon M3 can produce:
Anycubic Photon M3 3D-printer specifications
Features:
- – Large build volume (163.9 x 102.4 x 180mm)
- – 7.6 inch 4K monochrome display
- – LighTurbo Matrix light source
- – Laser engraved build plate
- – Fast printing (up to 50 mm/h
Technical specifications
- – Large build volume: 163.9 x 102.4 x 180 mm (L x W x H)
- – Device size: 269 x 256 x 425 mm (L x W x H)
- – 7.6 inch 4K monochrome display
- – High resolution (4096 x 2560 pixels)
- – Laser engraved build plate with a textured checkerboard pattern
- – Fast printing (up to 50 mm/h)
- – LCD screen with 400:1 contrast
- – Anycubic LighTurbo Matrix light source with LED beads
- – Anti-scratch film for LCD screen
Contact us if you have any questions or when you need help with settings for the Anycubic Photon M3 or other resin based 3D-printers when working with Liqcreate resin.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
