The Martrix520 is developed as a quasi-industrial desktop resin 3D-printer by the experienced UnionTech team. The Martrix520 has a build volume of 298 × 165 × 320 mm. By utilizing hot air heating it addresses resin performance issues in winter. In combination with remote control and monitoring, air filtration, power calibration and door detection it is developed for the quasi-industrial market. With easy replacement of light sources and screens for efficient and safe operation. According to the manufacturer with its high Precision, it is easy to achieve 0.15mm detail, and accuracy is comparable to 3D printing DLP technology. With printing speed up to 50mm/h (resin depending), forming a volume of one surface at a time.
The Liqcreate team would like to thank UnionTech and Martrix for the cooperation to have a Martrix520 resin 3D-printer in the Liqcreate laboratory for resin parameter development.
Resin 3D-printing accurate dental & engineering models with Martrix 520 – by UnionTech
The accuracy is dialed in for all Liqcreate resins listed below. Download the parameter file here to get started with 3D-printing right away!
| Resin | Layer thickness | Parameters available in file? | Remark |
| Deep Blue | 100 µm | Yes | |
| 50 µm | No | ||
| Premium White | 100 µm | Yes | |
| 50 µm | Yes | ||
| Premium Black | 100 µm | Yes | |
| 50 µm | Yes | ||
| Premium Model | 100 µm | Yes | |
| 50 µm | Yes | ||
| Wax Castable | 100 µm | Yes | |
| 50 µm | Yes | ||
| 30 µm | Yes | ||
| Clear Impact | 100 µm | Yes | |
| 50 µm | Yes | ||
| Strong-X | 100 µm | Yes | |
| 50 µm | Yes | ||
| ESD | 100 µm | Yes | |
| 50 µm | Yes | ||
| Tough-X | 100 µm | Yes | Use thick supports |
| 50 µm | Yes | ||
| Flexible-X | 100 µm | Yes | Use thick supports & |
| 50 µm | Yes | Maximum +- 70mm part height | |
| Flame Retardant | 100 µm | Yes | |
| HDT | 50 µm | Yes | |
| Bio-Med | 100 µm | Yes | |
| Clear | 50 µm | Yes | |
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
Printer Settings →
Accuracy measurements of Martrix520 by Liqcreate
What kind of accuracy can you expect?
Well if you use our file, for Liqcreate Strong-X the shrinkage correction is set at 1.0085% with a 0.01mm offset. you will get accuracy like this:
Contact us if you have any questions or when you need help with settings for Liqcreate resin on the Martrix520 or other resin based 3D-printers.
