The Miicraft 125 resin 3D-printer (Miicraft Ultra) is a high quality DLP machine. The Miicraft 125 comes in two different versions, the 125 and the 125Y. The difference between these two Miicraft 125 resin 3D-printers is the light source in which the 125Y prints at 385nm and the regular 125 uses a 405nm light source.
The Miicraft 125 (Miicraft Ultra) resin 3D-printers are completely open and have a wide variety of setting which can be adjusted. The most important setting for getting high quality prints are the power of the light source, which should be set at 3.5A for printing with Liqcreate resins. The second most important parameters is the exposure time, which can be found in the table below. Contact us if you need support or have any questions.
| Resin | Layer thickness | Settings | Remark |
| Deep Blue | 100 µm | 1,5 seconds | 3,5 A power |
| 50 µm | 1,3 seconds | 3,5 A power | |
| Stone Coal Black | 100 µm | 1,5 seconds | 3,5 A power |
| 50 µm | 1,3 seconds | 3,5 A power | |
| Premium White | 100 µm | 0,8 seconds | Preliminary settings |
| 50 µm | n/a | ||
| Premium Black | 100 µm | 0,8 seconds | Preliminary settings |
| 50 µm | n/a | ||
| Premium Model | 100 µm | 0,8 seconds | Preliminary settings |
| 50 µm | n/a | ||
| Clear Impact | 100 µm | 1,5 seconds | 3,5 A power |
| 50 µm | 1,3 seconds | 3,5 A power | |
| Strong-X | 100 µm | 1,5 seconds | 3,5 A power |
| 50 µm | 1,3 seconds | 3,5 A power | |
| Tough-X | 100 µm | 2,5 seconds | Preliminary settings |
| 50 µm | n/a | ||
| Hazard Glow | 100 µm | 1,5 seconds | 3,5 A power |
| 50 µm | 1,3 seconds | 3,5 A power |
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
Printer Settings →
About the Miicraft 125 resin 3D-printer
Miicraft Ultra resin 3D-printer specifications
MiiCraft Ultra resin 3D-printing series enables high resolution and accurate printing without sacrificing productivity and quality. With its large build platform, it gives the printing enthusiast the ability to print more models in one single printing session or one single high resolution model. MiiCraft Ultra resin 3D-printing seriesr is capable building models up to 150*84mm @ 78um or 57*32mm @30um with minimum thickness per layer at 5um. This makes the MiiCraft Ultra resin 3D-printers are ideal for jewelry industry, dental industry and micro structure applications. Contact us at info@liqcreate.com if you need help of have questions related to Liqcreate resin on the Miicraft Ultra resin 3D-printer
