The Anycubic Photon Mono SQ is one of Anycubic’s latest releases in 2021. With its SQ monochrome LCD screen, the Anycubic Photon Mono SQ is completely open for 3rd party resins. Due to the speed of new printer releases, settings for the Anycubic Photon Mono SQ are not available yet. Since the basics of most monochrome Anycubic resin 3D-printers are similar, a good starting point would be the settings that we have published for the Anycubic Photon Mono. Contact us if you have any questions or when you need help with settings.
Anycubic Photon Mono SQ resin 3D-printing parameters
| Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height (mm) | Lift speed / retract speed (mm/min) | Off-time / bottom (seconds) |
| Deep Blue | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Stone Coal Black | 100 µm | 6,5 | 2 | 45 | 6 | 90 / 120 | 2,0 / 2,0 |
| 50 µm | 5,5 | 2 | 35 | 6 | 90 / 120 | 2,0 / 2,0 | |
| Premium White | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Premium Black | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Premium Model | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Premium Tough | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Wax Castable | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Premium Flex | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Clear Impact | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Strong-X | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Tough-X | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Flexible-X | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Hazard Glow | 100 µm | n/a | |||||
| Composite-X | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Dental Model Pro Beige | 50 µm | n/a | |||||
| Dental Model Pro Grey | 50 µm | n/a | |||||
| Gingiva Mask | 100 µm | n/a |
*Heavy supports are adviced for Flexible-X and Tough-X
About the Anycubic Photon Mono SQ
Image by Anycubic: The new Anycubic Photon Mono SQ
The Anycubic Photon Mono SQ is Anycubics latest addition in its resin 3D-printer offering in 2021. With a build size of 128 x 120 x 200 mm (L x W x H) and 3K resolution, the Anycubic Photon Mono SQ is a totaly different machine than we have seen before. Usually resin 3D-printers have a rectangle shape with one side being much longer. With the new Anycubic Photon Mono SQ and 3K resolution, the build platform is almost a square. Which will make it easier in fitting bigger parts. Its monochrome LCD screen has a longer life-time than conventional RGB screens present in the older generation MSLA resin 3D-printers. Additionally the exposure times are much faster, which makes it easier to process slower resins, like the Liqcreate DLP and SLA range. Unfortunately at the time of writing there are no settings verified yet for the Anycubic Photon Mono SQ. As most Anycubic machines work similar, a good starting point would be to use the settings for the Anycubic Photon Mono. Settings will be published on this page when available. Contact us if you have any questions or when you need help with settings for the Anycubic Photon Mono SQ or other resin based 3D-printers.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
