The Anycubic Photon Mono 4 is anupdate to the popular Photon mono series. The Photon Mono 4 comes in two versions, the basic one and the Ultra. Find Anycubic Photon Mono 4 Ultra resin 3D-printing parameters in the link. This entry-level printer comes with 10K LCD resolution. Its build volume is 153.4 x 87 x 165 mm and LCD resolution of 9024 x 5120 pixels. This results in an XY pixel size of 17 x 17 µm. Thanks to our network of partners we received optimized parameters for some resins. It is predicted that almost all resins can work as most also work on the Anycubic Photon Mono 4! If your settings are not available, you can take the Mono 4 Ultra resin parameters as a starting point or reach out to us at info@liqcreate.com for assistance.
Anycubic Photon Mono 4 resin settings.
| Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height (mm) | Lift speed / retract speed (mm/min) | |
| Bio-Med Clear | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Strong-X | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Deep Blue | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Premium White | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Rigid Pro | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Premium Model | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Premium Tough | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Wax Castable | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| 25 µm | n/a | ||||||
| Premium Flex* | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Clear Impact | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Stone Coal Black | 100 µm | n/a | |||||
| 50 µm | 7,5 | 2 | 50 | 6 | 90 / 120 | ||
| ESD | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Flame Retardant | 100 µm | n/a | |||||
| HDT | 50 µm | n/a | |||||
| Tough-X* | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Flexible-X* | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Elastomer-X* | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Hazard Glow | 100 µm | n/a | |||||
| Composite-X | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Dental Model | 100 µm | n/a | |||||
| Pro Beige | 50 µm | n/a | |||||
| Dental Model | 100 µm | n/a | |||||
| Pro Grey | 50 µm | n/a | |||||
| Gingiva Mask | 100 µm | n/a | |||||
| 50 µm | n/a | ||||||
| Premium Black | 100 µm | n/a | |||||
| 50 µm | n/a |
* Tough-X, Flexible-X and Premium flex require heavy supports, Elastomer-X requires extra heavy supports.
About the Anycubic Photon Mono 4 resin 3D-printer.
Photo by Anycubic: The new 10K resin 3D-printers from Anycubic, the Photon Mono 4 and Photon Mono 4 Ultra.
Anycubic Photon Mono 4 resin 3D-printer specifications.
| Photon Mono 4 Ultra | Photon Mono 4 | |
| Device size | 231 x 236 x 430 mm | 230 x 235 x 391 mm |
| Device weight | 5 kg | 4 kg |
| Build volume | 153.4 x 87 x 165 mm | |
| Printing speed (0.1 mm layer height) | Standard resin: max. ≤ 80 mm/h High Speed Resin: max. ≤ 120 mm/h |
Standard resin: max. ≤ 50 mm/h High-Speed Resin: max. ≤ 70 mm/h |
| Layer height | 0.02-0.15 mm | 0.03-0.15 mm |
| LCD display | 7-inch monochrome LCD | |
| Display resolution | 10K | |
| XY resolution | 17 x 17 µm | |
| Light source | COB light source+Fresnel lens+light uniformity speed algorithm |
Optimised parallel matrix light source, 80–90% light uniformity |
| Light uniformity | ≥ 90% | 80–90% |
| Light intensity | ≥ 3500 μW/cm² | ~3000 μW/cm² |
| Release Film | ACF | FEP |
| Air Purifier | Optional (USB) | Optional (rechargeable) |
| Device display | 4.3 inch TFT touch | 2.8 inch TFT touch |
| Interface | USB, WiFi, LAN | USB |
| Levelling | Manual 4-point leveling | |
| Slicer | Photon Workshop | |
If you have any questions related to Liqcreate 3D-printing resins on the Anycubic Photon Mono 4 or other resin based 3D-printer. Send us an e-mail at info@liqcreate.com and our engineers will support to dial-in the requested Liqcreate resin.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
