Uniformation is one of the newcommers in resin 3D-printing hardware. With its flagship product the GKTwo it delviers a medium sized 8K precision resin 3D-printer. This 3D-printer has some extra features for a decent price. Liqcreate resins are optimized for this resin 3D-printer. Find the Uniformation GKtwo 8K resin 3D-printing parameters for Liqcreate resin in the link. In this page you can find the shrinkage and off-set factors. This will help if you need to print very accurate dental or engineering models. If there are any questions or if you need help with Liqcreate resin on the Uniformation GKTwo or other resin based printer, contact us via e-mail at info@liqcreate.com.
Shrinkage accuracy parameters for dental and engineering accuracy models.
As everybody knows there have been significant improvement in desktop resin 3D-printers over the past years. Main drivers were the switch to monochrome screens. Together with the availability of larger LCD screens with small pixels. Also extra software options for shrinkage and off-set compensation in software like Chitubox, VoxelDance Tango and Lychee paved the way for more precise applications. Resin does shrinks during 3d-printing and post-curing. It is important to compensate for this shrinkage in order to get reliable and accurate models. With the GKTwo we have optimized Liqcreate Dental Model Pro Grey resin and many other resins.
How accurate is the Uniformation GKTwo printer? Well if you dial in the printing parameters properly. Combined with shrinkage and offset parameters, this printer can be quite accurate. These settings were found to be the best.
This resulted in an accuracy measurements.
For an entry level resin 3d-printer that is not bad at all!
Then there are these more complicated cases with inserts / dies. in the Chitubox software there is a setting to change how tight these dies are. We have set them to medium and with the Tolerance compensation (beta) in the advanced tab. At value “a” you can change this. If you want it to be more loose, go more negative in steps of -0,01mm. If the dies too loose, go more positive in steps of +0,01mm until you find the right fit for you.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
Technical →
Accuracy parameters for other dental resin on the UniFormation GKtwo.
If you want to try a non validated resin, contact us at info@liqcreate.com and we can provide starting settings for experimenting. Happy printing if you happen have the new Uniformation GKTwo 8K resin 3D-printer!
Dental Model Pro Grey
Liqcreate Dental Model Pro Grey is a matte, opaque grey colored photopolymer resin. Its matte surface finish accentuates depth and detail in dental models, which accommodates a perfect view on undercuts and the surface is ideal for scan impressions. 3D-printed parts from this material have exceptional dimensional stability and low shrinkage during printing. Liqcreate Dental Model Pro Grey is easy to use on open SLA, MSLA and DLP 3D-printers in the range of 385 – 420nm. This material has excellent properties like low shrinkage and low odor, accuracy and dimensional stability, making it perfect for the production of dental models, C&B, thermoforming and aligner models.
Key benefits |
3D-Printer compatibility |
| ·       Excellent dimensional stability | ·       Asiga Max & 4K |
| ·       High detail & matte surface | ·    Ackuretta Dentiq |
| ·       Low Shrinkage | ·    Phrozon & Elegoo series |
| ·       Low Odor | ·    Photon series |
| ·       Extremely low shrinkage | ·    And many more |
