The Peopoly Phenom L LCD/MSLA 3D-printer is a large, open printer with a 405 nm light source, compatible with 3rd party resins. Some resins have been optimized. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have any questions.
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Premium Tough | 100 µm | 20 | First layers 6 x 60 seconds |
| 50 µm | n/a | ||
| Deep Blue | 100 µm | n/a | |
| 50 µm | n/a | ||
| Stone Coal Black | 100 µm | n/a | |
| 50 µm | n/a | ||
| Premium White | 100 µm | n/a | |
| 50 µm | 11 | First layers 4 x 60 seconds | |
| Premium Black | 100 µm | n/a | |
| 50 µm | n/a | ||
| Premium Model | 100 µm | n/a | |
| 50 µm | n/a | ||
| Premium Flex | 100 µm | n/a | |
| 50 µm | n/a | ||
| Composite-X | 100 µm | n/a | |
| 50 µm | 17,0 | 2 base layers of 80 seconds | |
| Strong-X | 100 µm | n/a | |
| 50 µm | n/a | ||
| Tough-X | 100 µm | Not Compatible | |
| Flexible-X | 100 µm | n/a | |
| 50 µm | n/a | ||
| Hazard Glow | 100 µm | n/a | |
About the Peopoly Phenom L resin 3D-printer.
Peopoly Phenom L resin 3D-printer specificatons.
Phenom L is one of the largest resin 3D-printer by Peopoly for the Phenom Series. Unlike the brand’s previous printers in the Moai series (which use laser), Phenom uses the MSLA (LCD+LED) approach. MSLA is much faster than other resin technology when printing a large object or a full plate of small objects because the entire layer is cured of resin. Peopoly’s customized light engine has even more light distribution than other printers using MSLA technology and a cooling system to improve print results while extending the life of the mask.
Peopoly Phenom L utilizes a widely adapted Chitubox firmware/software so users can easily move up from their existing smaller LCD printer. Users can set Phenom exposure freely to work with 3rd party resins.
Print volume:Â 345.6 X 194.4 X 400 MM
Resolution:Â 90 um
Technology: (RGB) MSLA 3D Printing
Vat Volume: 2.5 kg
Contact us if you have any questions or when you need help with settings for the Peopoly series or other resin based 3D-printers.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
